Economy Mask FFP3/V Case Of 50 Respair0009

MOULDED DISPOSABLE DUST MASK CONFORMITY.

Meets the FFP3 requirements of EN149:2001+A1:2009.
EC Certificate Number 505403, issued by BSi Product Certification.
Product Certification, in accordance with the PPE Directive 89/686/EEC.

PERFORMANCE.

Offers an assigned protection factor (APF) of 20 x Occupational Exposure
Standard (OES) for fine toxic dusts, fibres, fumes and mists.

MARKINGS.

EN149: 2001+A1:2009 FFP3 (NR)

MATERIALS.

Man made fibres. Polypropylene co-polymer exhalation valve with rubber
diaphragm.

INSTRUCTIONS FOR USE.

Mask must be fitted in accordance with the instructions supplied. Care must
be taken to ensure that the correct mask type is selected for the work to be
carried out. If in doubt as to the type of mask required seek professional
advice.

LIMITATIONS OF USE.

Protection will only be offered if the mask is fitted correctly. The mask must
be discarded and replaced if it is a). Removed whilst in the contaminated
area, b). Breathing difficulties due to clogging are experienced or, c). The
mask becomes damaged.
The mask, when in contact with the skin may cause allergic reactions to
susceptible individuals. If this occurs leave the hazard area, remove mask
and seek medical advice.

NOTES.

• Use in well ventilated areas only, which are not deficient in oxygen and
do not contain explosive atmospheres.
• This mask is not designed to be worn by people with facial hair.

CLEANING & MAINTENANCE.

Not applicable – disposable product. Store the

FITTING INSTRUCTIONS.

1. Hold the mask firmly and place the bottom headband over the head to
the nape of the neck.
2. Place the mask under the chin, then over the nose, putting the top head
band over the crown of the head.
3. Ensure a good fit by pulling the elastic through the clips and adjust
for comfort.
4. Ensure that the nose clip is moulded around the nose securely.
FIT CHECK
Check the fit of the mask by covering with both hands and exhale vigorously.
Any leaks around the face seal must be eliminated before entering
contaminated area.

INSTRUCTIONS FOR USE.

1. Suitable for use against solid and liquid particulates including oil
based mists.
2. This product does not protect against gases or where oxygen
levels are below 17%.
3. Do not use when concentrations or contaminants are unknown or
dangerous to life.
4. Leave the work area if distress or dizziness occurs.
5. Do not alter or modify the product in any way.
6. This product is intended only for single use and must not be used for
more than 8 hours. Replace mask if contaminated or if breathing
becomes difficult.
7. Facial hair may affect the efficiency of the product.
8. Do not use in an explosive area.
9. Ensure the product is suitable for the intended use.
10. Place/protect the product when not in use within its packaging.
11. Store within +5º C - +32º C. Store at <80% RH.