Fold Flat FPP2 Case Of 200 Respair003

SINGLE USE RESPIRATOR - PROTECTS AGAINST SOLID & LIQUID PARTICLES
INCLUDING OIL BASED MISTS APPLICATIONS.

Mining, Construction, Iron and Steel Industries.
Protects againstWood Dust, Aluminium, Gypsum, Graphite, Magnesium
Oxide, Platinum, Coal, Lead, Chrome, Silica,Welding Fumes, and many other
general hazards.

TECHNICAL SPECIFICATION.

• Lightweight - 3g
• Multi layered filter medium combining electrostatic charge
• Ergonomically shaped for comfort and ease of use
• Adjustable head straps to provide individual fit
• Adjustable nose clip to ensure good seal around nose
• Colour coded for ease of identification
• Individually packed complete with instructions for use
• Conforms to the European approved standard EN149:2001+A1:2009
• Non-allergenic

EN149:2001+A1:2009 FFP2 (NR) provides a protection factor of 10 x A.P.F.
(Assigned Protection Factor) and 12 x N.P.F. (Nominal Protection Factor)
USAGE
RESPAIR 2 can be used in atmospheres containing particulates as defined in
the current H.S.E. document EH40 to provide a level of protection of 10 x
A.P.F. and 12 x N.P.F. If there is a requirement for a higher level of protection
the next level is FFP3 providing a protection of 20 x A.P.F, and 50 x N.P.F.
UNIQUE FILTER MATERIAL
The unique filter material provides an extremely low breathing resistance,
and far exceeds the performance required by EN149:2001+A1:2009.

ERGONOMICALLY DESIGNED.

Allows freedom of speech, an easy fit minimising leakage providing a high
level of protection and comfort plus complete compatibility with all other
forms of protective equipment giving an especially clear field of vision.

FITTING INSTRUCTIONS

1. Hold the mask firmly and place the bottom headband over the head to
the nape of the neck.
2. Place the mask under the chin, then over the nose, putting the top head
band over the crown of the head.
3. Ensure a good fit by pulling back the side clips on to the face and adjust
for comfort.
4. Ensure that the nose clip is moulded around the nose securely.
FIT CHECK
Check the fit of the mask by covering with both hands and exhale vigorously.
Any leaks around the face seal must be eliminated before entering
contaminated area.

INSTRUCTIONS FOR USE

1. Suitable for use against solid and liquid particulates including oil
based mists.
2. This product does not protect against gases or where oxygen
levels are below 17%.
3. Do not use when concentrations or contaminants are unknown or
dangerous to life.
4. Leave the work area if distress or dizziness occurs.
5. Do not alter or modify the product in any way.
6. This product is intended only for single use and must not be used for
more than 8 hours. Replace mask if contaminated or if breathing
becomes difficult.
7. Facial hair may affect the efficiency of the product.
8. Do not use in an explosive area.
9. Ensure the product is suitable for the intended use.
10. Place/protect the product when not in use within its packaging.
11. Store within +5º C - +32º C. Store at <80% RH.